TOP quality Interlocking Sport court tiles are produced  by Wanhe Industry 

1.    Ice skating is feasible in the four seasons all the year around
2.    Usage is available indoor and outdoor
3.    Fit for fixed and mobile ice rinks because of its easily and conveniently  installation
4. Low-cost management: utility bills are saved for water and electricity being not needed
5.    Easy maintenance
6.    Longer service life of not less than 10 years
7.    Green, environmental protection, and no pollution
8.    Completely  recyclable
9.    Using the common ice skating equipment
 

Ice hockey sport, Campus activities, Stage performance, Figure skating, Backyard garden, Basement, stadium, Featured School
training ground, Commercial skating ground, Skating club ground, etc.
The surface is very smooth and seamless.
Easy to move, can be adjusted according to site conditions, there are no strict site restrictions.
Free from the site, weather, season, and temperature restrictions, indoor and outdoor can be used.

1. It will not warp, crack, splinter, or corrode, high-wear-resistance, good-chemical resistance, has a longer lifetime.
2. Low-temperature resistance, low friction coefficient, self-lubrication, no pollution, no noise.
3. High-impact resistance, Plastic ice rinks are harder than steel, can enjoy a high level of security.
4. Cost advantage, without the need to bear the high cost, no electricity and water bills, without complicated maintenance.
5. Compared with the real ice rink, it costs only about 1/5 of real ice.
6. The right size for any space. Installation is quick and easy.
7. Artificial ice rink requires minimal maintenance, ice rinks use the tongue and groove connection system, only a hammer is required to fit the plugs that will secure the panels together. Ice rink panels can withstand limitless installation, a lifetime of up to 10 years.
 

1.Q: What is synthetic ice tiles?
A: Our synthetic ice tile is made of plastic material. We offer a self-lubricating material made of UHMW PE plastic and a
non-lubricated material made from HDPE plastic. The density and rigidity of the synthetic ice tiles products, when coupled with
lubricant, create a surface akin to real ice for skating purposes.

2. Q: What is the difference between synthetic ice tiles and real Ice?
A: Our synthetic ice tiles are manufactured and infused with a slip agent additive that reduces surface friction (coefficient of
friction) and does not require any surface glide enhancers. Our proprietary blend offers optimal glide and performance while
limiting skate blade wear.
Ideal for Ice Skating
Great for Dedicated Spaces
Commercial or Residential installations.
No surface Enhancers Necessary

3. Q: Will a hockey puck slide the same on Wanhe synthetic ice tiles?
A: Yes, a hockey puck slides and moves very well across Wanhe synthetic ice tiles. The expected feel of the puck on the stick is
about 95% of natural ice. The more the tiles are used, the more the self-lubricating properties come out, making them better the
more they are used!

4.Q: Will I need any special tools to install synthetic ice tiles?
A: A 4 pounds rubber mallet is required to pound the interlocking dovetails together to lock panels into place. If cutting is
required, a circular saw will be needed. You can provide your design, and we can cut it on production directly as your request.
Synthetic ice is a "floating floor", much like indoor laminate flooring, and is not to be mechanically fastened in any way. Be sure
not to impede the surface around the perimeter and to leave a gap if boards or fencing is to be installed.

5. Q: How to clean synthetic ice tiles?
A: Both infused and non-infused surfaces need to be kept clean and free of dirt, dust, and debris to maintain optimal performance.
Use any PH-neutral soap to break up dirt accumulation on your surface and wipe clean. A soft-scrub mop or brush may be used to
loosen-up stubborn scuff marks.
For outdoor rinks simply rinse with a hose or power-wash with a fine spray. In cold climate areas, provisions must be made for
snow and ice removal to allow for expansion and contraction to avoid stress cracks over time.

6. Q: How often will I need to resurface the synthetic ice tiles?
A: Wanhe synthetic ice tiles don't require resurfacing. Should the ice become dirty or full of debris, simply broom
sweep the surface and mop it with regular soap and water. A floor scrubber may also be used but is not required.

7. Q: What are the requirements for the installation floor?
A: The Synthetic Ice tiles are fabricated with the interlocking Dovetail profile to insure a flat skating surface and secure
connection. Our tiles can be easily assembled on any hard, flat surface using a heavy rubber mallet or tamper with protective wood
blocking.

8. Q: Can I use Synthetic Ice outside?
A: Yes! We made it to have UV-protected qualities, and withstand high temps. While it is protected, we recommend making sure to cover it if you can, and to watch for buckling of the seams.

.

Wanhe Industry and Trade Co., Ltd. is a professional manufacturer and exporter that is concerned with the design, development, and production
of plastic suspended assembly sports flooring, decking wood plastic composite (WPC) flooring, and artificial turf. All of our products comply with international quality standards such as SGS, CE, etc.

Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee total customer satisfaction.

As a result of our high-quality products and outstanding customer service, we have gained a global sales network reaching Japan,
the US, and European Market.

If you have any request for our flooring or would like to discuss the further order, welcome to contact us.Looking forward to forming
successful business relationships with you in the nearest future.